Portsmouth Auto Locksmith

Broken Car Key Extraction in Portsmouth

A key snapped in the door or the ignition. The broken piece comes out without damaging the barrel, and a replacement is cut to the vehicle in the same visit.

Portsmouth and nearby townsOpen 9am to 5pm, seven daysNo VAT added
Extracted without damageReplacement cut same visitLeave the stub where it is
Two jobsPriced as one visit
Same visitOut and replaced
No VATOn any figure

Between 9am and 5pm. Tell me where the key broke, because a door and an ignition are not the same job.

Tell me about the vehicle

Make, model, year, the registration, and what the key or the car is doing. I will come back with a price.

Leave it exactly where it is

The single most useful thing you can do is nothing. A broken key sitting still in a lock is a straightforward extraction. The same key after twenty minutes of effort often is not.

Every attempt to grip the stub pushes it further in, rotates it out of alignment, or shears off another fragment. Pliers are the worst of it, because they crush the blade and remove the flat faces that extraction tools need to grip. Superglue on a matchstick is the second worst, because it bonds the fragment to the wafers inside the barrel and turns a ten minute job into a barrel replacement.

If the key broke in the ignition and part of it is still proud, do not turn it. Ring and leave it.

What makes it worse

  • Pliers or mole grips on the exposed stub.
  • Glue of any kind, which bonds the fragment to the lock.
  • Tweezers or a paperclip pushing the piece deeper.
  • Spraying lubricant in, which carries grit onto the broken face.
  • Turning the stub once it has broken.

Why keys snap

Almost never randomly. There is usually a cause that is still there afterwards, which matters because the replacement will meet the same conditions.

  • Metal fatigue at the shoulderThe point where the blade meets the head flexes every time you turn it. After enough years it cracks, and the crack is invisible until the day it goes.
  • A stiff barrelIf the lock has been getting harder to turn, you have been applying more force for months. The key is simply the part that gave way first, and the barrel is the real fault.
  • A worn key in a worn lockTwo worn surfaces need more force to align. Force plus fatigue is what breaks blades.
  • A copy of a copyA key traced from an already worn key starts life weak, and thin spots at the cuts are where it fails.

What happens when I arrive

Two jobs, one visit, and the second one is the part people forget to ask about.

1

The fragment comes out

Extraction tools grip the broken face and withdraw it along the path it went in, without turning it and without marking the wafers.

2

The barrel is checked

If the lock was the reason the key broke, replacing the key alone means doing this again. The barrel is tested before anything is cut.

3

A replacement is cut

Cut to the vehicle pattern rather than to the broken piece, and programmed if the vehicle needs it, then tested.

Where I cover

All of Portsmouth at one price, including Southsea, Fratton, North End, Cosham, Hilsea, Landport, Buckland, Milton, Eastney and Portsea.

North of the city I cover Cowplain, Purbrook, Widley, Horndean and Clanfield. If the other half of the key is shut inside the car, say so and the opening is priced with it.

Towns with their own page

Each one says what I do there.

Frequently asked questions

My key snapped in the lock. Can you get it out?

Yes, in nearly every case, and without damaging the barrel. The one thing that changes that is a fragment somebody has already tried to grip or glue.

Can I get it out myself with pliers?

Please do not. Pliers crush the flat faces that extraction tools need, and a crushed stub frequently turns a ten minute job into a barrel replacement.

Will I need a whole new lock?

Usually not. The barrel is only at risk if the fragment has been forced, glued or turned after breaking.

Can you cut a new key from the broken half?

The replacement is cut to the vehicle rather than to the fragment. Copying a broken key would copy the wear that broke it.

Is this cheaper than losing the key altogether?

Yes. Part of the key still exists and the vehicle is accessible, which makes it a smaller job than every key being lost.

My key broke because the ignition was stiff. Is that fixed too?

It is checked, and that is the point. A replacement key going into the same stiff barrel will break again, so the barrel is tested before anything is cut.
Scroll to Top