Portsmouth Auto Locksmith

Car Key Programming in Portsmouth

A cut key opens the doors and starts nothing until it is paired with the car. I program keys, fobs and proximity systems at your vehicle, including keys you have bought yourself.

Portsmouth and nearby townsOpen 9am to 5pm, seven daysNo VAT added
Programmed at your vehicleYour own key or one I supplyTested before I leave
From 100Key cut and programmed
Priced on callProgramming only
Same visitNothing ordered in

Pounds, between 9am and 5pm. If you already have the key, say so, because programming alone costs less.

Tell me about the vehicle

Make, model, year, the registration, and what the key or the car is doing. I will come back with a price.

What programming actually is

Every car built since the late nineties has an immobiliser. It is a small control unit that refuses to let the engine run unless it recognises the key by its electronic identity.

Programming is the act of introducing a key to that unit. The car is told, in effect, that this new identity is allowed to start it. It is not a setting you can change from the dash on most vehicles, and it is not something the key does on its own. It is a conversation between equipment and the car, done through the diagnostic port.

Without it, the metal still works and the engine does not.

Three separate things get programmed

  • The transponder chip, which lets the engine run.
  • The remote buttons, which lock and unlock the doors.
  • On keyless cars, the proximity system that senses the key in your pocket.

What it costs

Programming is usually bought as part of a key, so these are the figures for the whole job.

Key cut and programmedFrom 100Pounds, with a working key already in existence. Both halves of the job.
Programming onlyPriced on the callIf you already hold the key, the price drops. Tell me the make, model and year.
Every key lostFrom 190Pounds. The vehicle has to be read first, and the lost key deleted.

No VAT is added. Four things move the figure:

  • Whether a working key still existsOne working key roughly halves the job, because the vehicle can be read from it rather than from nothing.
  • Blade, remote or proximity fobA plain blade is cheapest, a remote costs more, and a keyless fob more again before any labour.
  • Make, model and yearSecurity changes year to year on the same model. The badge does not tell you the job, the year does.
  • The time of day9am to 5pm is the standard rate. Outside those hours the figure is different and you hear it before I set off.

Keys you bought yourself

Bring me a key you found online and I will program it, with one honest warning attached.

The equipment does not care where the key came from. What decides whether it works is whether the key is the right type for your vehicle and whether the chip inside it is genuine. Cheap listings often use the right-looking shell around the wrong chip, or a chip that has already been written to and cannot be written again. That is not something either of us can see until the programming is attempted.

So the rule is simple. If it works, you have saved money on the part. If the key turns out to be wrong or already used, you have paid for my time and still need a key. Say on the phone that it is your own key and I will tell you what I think of it before I travel.

What makes a bought key more likely to work

  • It was sold against your registration rather than a generic model.
  • It is new and unused rather than second hand off a scrapped car.
  • The buttons and the blade profile match your original exactly.
  • The seller states the chip type rather than only the shell.

Can you program a key yourself

On a small number of vehicles, yes, and I will tell you if yours is one of them rather than charge you to find out.

Some older models allow a second key to be added from the driver seat using an existing working key and a sequence of ignition turns. Where that applies and you already have the key, the honest answer is to do it yourself. It stops being possible the moment you have no working key, because every one of those procedures starts by requiring one, and it was removed from almost everything built in the last fifteen years.

Where self programming does not apply

  • Any vehicle where every key is lost.
  • Keyless and proximity systems.
  • Most vehicles built after roughly 2010.
  • Any car where the immobiliser has been replaced or repaired.

Where I cover

All of Portsmouth at one price, including Southsea, Fratton, North End, Cosham, Hilsea, Landport, Buckland, Milton, Eastney and Portsea.

North of the city I cover Cowplain, Purbrook, Widley, Horndean and Clanfield. Programming happens through the diagnostic port at the vehicle, so the car stays where it is.

Towns with their own page

Each one says what I do there.

Frequently asked questions

Can you program a key I bought online?

Yes, and it usually works. Where it does not, the cause is a wrong or already used chip inside a correct looking shell. Tell me on the phone that it is your own key and I will say what I make of it before travelling.

Why will my new key not start the car?

Almost always because it has been cut but not programmed. The metal turns the barrel, the immobiliser does not recognise the chip, and the engine will not run. Cutting and programming are two different jobs.

Do you need to take the car anywhere?

No. Programming is done through the diagnostic port where the vehicle is parked.

How long does programming take?

On a blade or transponder key it is short. A keyless system takes longer, and a handful of vehicles need a step only the manufacturer can authorise, which I will tell you about on the call.

Can you program a key fob to work the doors only?

Yes, and sometimes that is all that is needed. If the fob has simply stopped responding, a remote repair is often cheaper than reprogramming or replacing.

Will programming a new key cancel my old one?

Not automatically. Deleting an old key is a separate step, and it is the one that matters if a key has been stolen.
Scroll to Top