Portsmouth Auto Locksmith
Car Key Cutting in Portsmouth
Keys cut to your vehicle rather than copied from a worn original, at the kerb where the car is parked. A cut key opens the doors. On most cars made since the late nineties it also needs programming before the engine will start.
Pounds, between 9am and 5pm. Cutting alone and cutting with programming are priced differently.
Tell me about the vehicle
Make, model, year, the registration, and what the key or the car is doing. I will come back with a price.
Cut to the car, not copied from your key
There are two ways to produce a car key, and they do not give the same result. One traces the key you hand over. The other cuts to the pattern the vehicle was built to.
Tracing copies the wear as well as the shape. If your original has been in a pocket for nine years, a traced copy starts life as worn as the key it came from, and it is the copy that gets blamed when the ignition starts sticking. Cutting to the vehicle pattern produces the key the car expected when it left the factory.
Why it matters more than it sounds
- A traced copy inherits every bit of wear in the original.
- A worn key accelerates wear inside the ignition barrel, which is a far dearer repair.
- A key cut to the vehicle turns cleanly in every door and the ignition, not just the one you use.
The two kinds of cut
Which one your car takes is decided by its age and model, not by preference.
- Edge cut, also called a standard bladeTeeth along the edge of the blade. Older vehicles, simpler equipment, quickest to produce. Still common on vans and on cars built before the mid two thousands.
- Milled track, also called laser cutA wavy channel milled into the face of the blade rather than teeth on the edge. Stronger, harder to pick, and it goes into the lock either way up. It needs a different machine and takes longer.
- Why it changes the priceA milled track blade costs more as a blank and takes longer to cut. It is one of the reasons two cars of the same age can be quoted differently.
- What it does not changeEither way the metal alone will not start a modern car. The chip in the head has to be programmed to the immobiliser as a separate step.
What cutting costs
Cutting is almost never bought on its own, so these figures are for the job people actually need.
No VAT is added to any of these. The vehicle, the key type and whether a working key exists are what move them.
When a freshly cut key will not start the car
This is the single most common misunderstanding about key cutting, and it costs people money at kiosks and market stalls every week.
A cut blade is a mechanical object. It will turn the door lock and it will turn the ignition barrel. It will not start the engine, because the car is not looking at the metal. It is looking for a chip it recognises. Without that step the car cranks and stops, or does not crank at all, and the key looks faulty when it is simply unfinished.
What has to happen after cutting
- The transponder chip is paired to the immobiliser.
- Any buttons are matched to the vehicle separately from the chip.
- On an all keys lost job, the missing key is deleted at the same time.
- The finished key is tested on every door, the boot and the ignition.
Where I cover
All of Portsmouth at one price, including Southsea, Fratton, North End, Cosham, Hilsea, Landport, Buckland, Milton, Eastney and Portsea.
North of the city I cover Cowplain, Purbrook, Widley, Horndean and Clanfield on the same terms. Cutting happens at the vehicle, so there is nothing to drop off and nothing to collect.
Towns with their own page
Each one says what I do there.