Portsmouth Auto Locksmith
Car Key Fob Repairs in Portsmouth
Dead buttons, a cracked case or a fob that has stopped talking to the car. Repairing it is usually far cheaper than replacing it, and it keeps the chip you already have programmed to your vehicle.
Between 9am and 5pm. Tell me what the fob does and does not do and I can usually price it on the phone.
Tell me about the vehicle
Make, model, year, the registration, and what the key or the car is doing. I will come back with a price.
Why repairing beats replacing
A key fob is three separate things in one plastic shell: a blade, a chip and a circuit board with buttons. When a fob fails it is almost always one of the three, not all of them.
A new fob means buying all three and then paying to have the chip programmed to the vehicle from scratch. A repair keeps the chip that is already paired, which removes both the part cost and the programming step. That is the whole of the saving, and it is a large one.
It is worth being straight about the exception: water damage to the board is usually terminal, and a fob that has been through a wash cycle rarely comes back.
What is usually wrong
- A flat battery, which is a few pounds and often a job you can do yourself.
- Worn button contacts, where the rubber pad has stopped bridging the board.
- A cracked case letting the blade wobble or the board flex.
- A broken flip spring, so the blade will not stay out.
- A snapped blade in an otherwise healthy fob.
What a fob fault looks like
Telling a fob fault from a car fault saves you buying a key you do not need.
| What happens | Most likely | What it needs |
|---|---|---|
| Buttons work close up but not at range | Battery or aerial | Battery first, then the board |
| One button dead, the rest fine | Worn contact pad | Button repair |
| No buttons at all, key still starts car | Board or battery | Fob repair, not a new key |
| Buttons fine, engine will not start | Chip or immobiliser | Transponder work, not the fob |
| Blade snapped, electronics fine | Mechanical only | Extraction and a new blade |
| Nothing works and it has been wet | Water damage | Usually a replacement fob |
The battery, honestly
Before you pay anybody, change the battery. On a good share of the fobs I am called to, that is the entire fault.
Most take a flat coin cell costing a couple of pounds from any supermarket. The tell is range: a fob that works with your hand on the door but not from across the car park is nearly always a tired battery rather than a failing board. If changing it fixes the problem, you have saved a call-out and I would rather you did.
Where it does not fix it, you have ruled out the cheapest cause before spending anything, and that makes the rest quicker to diagnose.
Changing it yourself
- Look for a small slot in the seam, not a screw. Most cases prise rather than unscrew.
- Note which way up the old cell sits before you lift it out.
- Avoid touching the flat faces of the new cell, because skin oils shorten them.
- If the case will not close square afterwards, stop. A forced case cracks at the corner.
Where I cover
All of Portsmouth at one price, including Southsea, Fratton, North End, Cosham, Hilsea, Landport, Buckland, Milton, Eastney and Portsea.
North of the city I cover Cowplain, Purbrook, Widley, Horndean and Clanfield. A fob repair is a planned job rather than an emergency, so it is easy to fit around where you are.
Towns with their own page
Each one says what I do there.