Guides
The Types of Car Key Explained
There are five kinds of car key in common use in the UK, and which one you hold decides what a replacement costs, how long it takes and whether it can be done at the roadside. You can identify yours in about ten seconds.
How to tell which one you have
Work down this list and stop at the first one that matches. The order runs oldest to newest, which is also cheapest to dearest.
| If your key | It is a | Era |
|---|---|---|
| Is a plain metal blade with nothing electronic in the head | Mechanical key | Up to the mid 1990s |
| Is a blade with a fat plastic head and no buttons | Transponder key | Mid 1990s onward |
| Has buttons and a fixed blade sticking out | Remote key | Late 1990s onward |
| Has buttons and a blade that folds into the body | Flip key | 2000s onward |
| Has buttons, no visible blade, and the car has a start button | Proximity or smart key | Late 2000s onward |
The giveaway for a transponder. A plain mechanical key and a transponder key look almost identical. The difference is the head, because a transponder has a thicker plastic head to hold a chip inside it. If the car was built after about 1997 and has an immobiliser, it is a transponder even though it has no buttons.
Mechanical keys
A shaped piece of metal and nothing else. The lock recognises the shape, the ignition recognises the shape, and there is no electronics anywhere in the system.
These are the cheapest keys to replace because the whole job is cutting. They can be cut from an existing key or, better, to the vehicle itself, which produces a cleaner key than copying a worn original. Classic cars, older vans and a lot of agricultural and commercial vehicles still use them.
Transponder keys
A blade for the lock plus a chip in the head for the immobiliser. The chip carries no battery. It is powered by a coil around the ignition barrel, which is why a transponder key keeps working forever and why a flat fob battery never stops a car starting.
Replacing one is two jobs rather than one. The blade is cut, and then the chip is paired with the car so the immobiliser accepts it. A key that has been cut but not paired will turn in the ignition and leave the engine dead, which is the commonest complaint about keys bought online.
Remote and flip keys
A transponder key with buttons and a battery added. The buttons lock and unlock over radio. The chip still does the starting, and still does it without the battery.
A flip key is the same thing with a hinge, so the blade folds away. The mechanism is the usual failure point. The hinge pin wears and the blade starts to wobble, which eventually puts enough sideways load on the barrel to damage it. A wobbling flip key is worth repairing before it becomes an ignition job.
Proximity and smart keys
The car listens for the key continuously, so you unlock by touching the handle and start by pressing a button. The key is awake and transmitting far more often than a remote, which is why its battery lasts half as long.
These are the most expensive keys to replace, for three reasons. The part itself costs more, the programming is more involved, and on some makes the car stores its keys in a module rather than offering them up through the diagnostic port. The last one is what separates a roadside job from a longer one.
Every proximity key hides a blade. There is a release catch somewhere on the fob that frees a metal emergency key, and a keyhole on the driver door hidden under a plastic cap. Worth finding once, in daylight, before you ever need it.
What the type means for a replacement
| Type | Cut | Programmed | Roadside |
|---|---|---|---|
| Mechanical | Yes | No | Always |
| Transponder | Yes | Yes | Almost always |
| Remote | Yes | Yes | Almost always |
| Flip | Yes | Yes | Almost always |
| Proximity or smart | Usually, for the emergency blade | Yes | Usually, and occasionally not |
The practical upshot is that the older the key, the more certain the answer. Everything up to a flip key is a settled, same-visit job on almost any vehicle. Proximity keys are where make, model and year start to matter, and where it is worth asking the question before anybody travels. The pairing step itself is covered in car key programming.
Two words people mix up
- Keyless entry means you unlock without pressing anything. Touch the handle with the key in your pocket.
- Keyless go, or push-button start, means you start without putting a key anywhere. Most cars with one have the other, but not all, and some have a push-button start that still needs the fob in a slot.
The distinction matters when you describe your car to somebody on the phone, because it tells them immediately which family of key they are being asked about.
Not sure which one you are holding
A photograph settles it faster than a description. The shape of the head, whether there is a hinge, and whether the car has a start button are the three things that place any key.
Send a picture of the key
One photograph of the key and the make, model and year of the car is enough to tell you the type, what a replacement involves and what it would cost.
Related guides and services
what a replacement key costs, why a car key stops working, transponder key programming, replacement key fobs supplied and programmed.
Frequently asked questions
How do I know if my key has a chip in it?
Look at the head. A transponder key has a noticeably thicker plastic head than a plain mechanical key of the same age. If the car has an immobiliser, and almost everything built after about 1997 does, then the key has a chip whether or not it has buttons.
Is a transponder key the same as a remote key?
No. A transponder key has a chip and no buttons. A remote key has the same chip plus buttons and a battery. Every remote key is a transponder key with more on top.
Why does my car still start when the fob battery is flat?
Because starting does not use the battery. The chip is powered by the car through a coil at the ignition or the start button, so it works whether the cell is fresh or dead.
Which type is the most expensive to replace?
A proximity or smart key, by a wide margin. The part costs more and the programming is more involved than on anything older.
Can every type be made at the roadside?
Nearly. Mechanical, transponder, remote and flip keys are routine same-visit work. A small number of proximity keys need the module reading rather than the diagnostic port, and that is the one case worth checking before a visit is booked.
What is a laser cut or sidewinder key?
A blade with a wavy channel milled into the face of the metal rather than teeth cut into the edge. It is a cutting style rather than a separate type, it is harder to pick and harder to copy, and it needs a different machine. The electronics inside are unchanged.
My key has no blade at all. How do I get into the car if the battery dies?
It has one. There is a release catch on the fob that frees a hidden metal blade, and a keyhole under a cap on the driver door handle. Find both once before you need them.
Does the type change how long a replacement takes?
Yes. A mechanical key is minutes. Transponder, remote and flip keys are typically under an hour at the vehicle. Proximity keys take longer and vary most by make and year.