Portsmouth Auto Locksmith

Spare Car Keys in Portsmouth

A second key cut and programmed while your first one still works. It is the cheapest key job there is, because the car can be read from the key you already hold.

Portsmouth and nearby townsOpen 9am to 5pm, seven daysNo VAT added
From 100 poundsDone at your vehicleUsually inside the hour
From 100Spare key
From 190If you wait until all are lost
90Pounds saved by doing it now

Pounds, between 9am and 5pm. The gap between the first two figures is the whole argument for this page.

Tell me about the vehicle

Make, model, year, the registration, and what the key or the car is doing. I will come back with a price.

Why a spare now costs about half

Every key job turns on one question: does a working key still exist. While the answer is yes, the vehicle can be read from that key, and the work is short.

Once the answer is no, the car has to be read from nothing, the security data has to be pulled from the vehicle itself, and any missing key has to be deleted. That is more time, more equipment and a higher figure. The key has not changed. Your position has.

The same car, two situations

  • One key working: from 100 pounds, usually inside the hour.
  • Every key gone: from 190 pounds, and the lost key has to be wiped from the car.
  • The difference is not the key. It is whether anything is left to work from.

What a spare costs

Starting-from figures, and the key type is what moves them most on this page.

Plain blade spareFrom 100Pounds. Metal only, nothing to program. The cheapest key on this site.
Transponder or remoteFrom 100Pounds, rising with the key. The chip and the buttons both have to be matched to the car.
Keyless or proximityPriced on the callThe part itself costs more before any labour starts, so this one is quoted per vehicle.

No VAT is added. Four things move the figure:

  • Whether a working key still existsOne working key roughly halves the job, because the vehicle can be read from it rather than from nothing.
  • Blade, remote or proximity fobA plain blade is cheapest, a remote costs more, and a keyless fob more again before any labour.
  • Make, model and yearSecurity changes year to year on the same model. The badge does not tell you the job, the year does.
  • The time of day9am to 5pm is the standard rate. Outside those hours the figure is different and you hear it before I set off.

How long it takes

Short, which is the other reason to do it before you need it.

1

You hand me the working key

It gives me the pattern and the security data, so there is no reading the vehicle from scratch.

2

The blade is cut

Cut to the vehicle pattern rather than traced from your original, so the new key is not a copy of a worn one.

3

The chip is programmed

Paired to the immobiliser, buttons matched, then tested on every door and the ignition.

When it is too late to be cheap

A spare is only a spare while the original works. The moment the last key is lost, broken beyond use or locked somewhere you cannot reach, this page stops applying.

That sounds obvious and it catches people out constantly, usually on a Friday afternoon. A worn key that is getting harder to turn, a fob with a battery you keep replacing, or a single key shared between two drivers are all warnings rather than inconveniences.

Signs you are one bad day from the dearer job

  • Only one key exists for the vehicle.
  • The key has to be wiggled, or only works in one door.
  • The key is worn smooth along the cut edge.
  • Two people share one key and it travels daily.
  • The fob has been dropped, soaked or sat on.

Where I cover

All of Portsmouth at one price, including Southsea, Fratton, North End, Cosham, Hilsea, Landport, Buckland, Milton, Eastney and Portsea.

North of the city that takes in Cowplain, Purbrook, Widley, Horndean and Clanfield. A spare is a planned job rather than an emergency, so it is easy to fit around where you are.

Towns with their own page

Each one says what I do there.

Frequently asked questions

How much is a spare car key?

From 100 pounds, with no VAT on top. A plain blade sits at the bottom of that, a remote above it, and a keyless fob is quoted per vehicle because the part costs more.

Do you need my original key?

Yes, and that is the point. The working key is what makes this the cheap job. Without it the work becomes a replacement at a higher figure.

How long does cutting a spare take?

Usually inside the hour at your vehicle for a blade or a transponder key. A keyless system takes longer.

Can I get a spare cut at a shoe bar or a hardware shop?

The metal, sometimes. The chip, no. A blade cut without programming will open the door and will not start the engine, which catches a lot of people out.

Is it worth having two spares?

For a household where one car is shared, usually yes. The second one is no cheaper than the first, but neither is it dearer, and it removes the single point of failure.

Will a spare work on the boot and the doors?

Yes. It is tested on every door, the boot and the ignition before I leave.

My only key is getting stiff. Is that worth acting on?

Yes. A worn key that needs wiggling is often the first sign of wear in the ignition barrel as well as the key. Cutting a fresh key to the vehicle pattern frequently fixes it.
Scroll to Top